Originating A Voice Call - NEC UNIVERGE SV9300 DT410 User Manual

ORIGINATING A VOICE
CALL
Instead of ringing, this feature informs the
incoming call by voice.
This feature is set by Soft key or feature key.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
Line key lamp lights green. →
11:00 AM SUN 1 JUN 2014
Recall PICK
2. Dial extension number.
You will receive a ring back tone.
11:00 AM SUN 1 JUN 2014
Recall VOICE
3. Press Soft key (VOICE) or Voice Call
feature key.
VOICE CALL
11:00 AM SUN 1 JUN 2014
Recall VOICE
4. Lift the handset and announce an
incoming call by voice to called
party.
Speaker key lamp goes off. →
5. Start conversation after called party
answered.
11:00 AM SUN 1 JUN 2014
MIC Mute
200
>>>>
201
CB >>>>
201
CB >>>>
201
"VOICE" is displayed on the LCD of called
party.
37
FEATURE OPERATION