Disconnecting From The Sensor Head - Panasonic HG-T Series User Manual

Installation and Connections

4.3.2 Disconnecting from the Sensor Head

1.
Turn the fastening ring on each sensor head connection cable connector in the direction of
the arrow to loosen.
2.
Grasp each connector on the sensor head connection cable and pull out to remove.
When disconnecting, always make sure that the fastening ring has been completely loos-
ened before pulling out the cable. Risk of damage if you pull the cable with excessive force
(15N or more) with the fastening ring tightened.
4-6
1
2
2
2
2
1
WUME-HGT-3