Controller Wiring Connection Diagrams - Panasonic HG-T Series User Manual

4.1.3 Controller Wiring Connection Diagrams

● HG-TC101, HG-TC101-P / Master unit
(Note): Use a shielded cable to extend the analog output line.
● HG-TC111, HG-TC111-P / Slave unit
(Note): Use a shielded cable to extend the analog output line.
<Reference>
● The HG-TC111 and HG-TC111-P cables do not have +V or 0V. Power is supplied from the con-
nector of the master unit.
● The HG-TC113 does not have +V, 0V, or each I/O. The connector on the slave unit is used to
connect to the master unit.
WUME-HGT-3
Installation and Connections
(Brown) + V
(Black) Output 1
(White) Output 2
(Black / Gray) Output 3
(Pink) External input 1
(Purple) External input 2
(Pink / Purple) External input 3
(Blue) 0V
(Gray) Analog output
(Shielded) Analog ground (Note)
(Black) Output 1
(White) Output 2
(Black / Gray) Output 3
(Pink) External input 1
(Purple) External input 2
(Pink / Purple) External input 3
(Gray) Analog output
(Shielded) Analog ground (Note)
4-3