Mounting The Controller; Mounting On A Din Rail; Removing From A Din Rail - Panasonic HG-T Series User Manual

Installation and Connections

4.1 Mounting the Controller

4.1.1 Mounting on a DIN Rail

1.
Fit the rear part of the mounting section of the controller on a DIN rail.
2.
While pushing the rear of the mounting part forward, insert the front of the mounting part
into the DIN rail.

4.1.2 Removing from a DIN Rail

1.
Push the controller forward.
2.
Lift up the front part of the controller to remove it.
4-2
1
2
1
2
WUME-HGT-3