How To Connect - Panasonic HG-T Series User Manual

Installation and Connections

4.4.1 How to connect

For details on how to mount a controller, refer to "4.1 Mounting the Controller".
1.
Mount a master unit on a DIN rail.
2.
Remove the connector cover.
3.
Mount each slave unit one at a time on the DIN rail. Remove all connector covers except
for the cover on the end slave unit.
4.
Slide each slave unit and connect the female and male connectors.
4-12
Master unit
Connector cover
Slave unit
Slide
WUME-HGT-3