Panasonic HG-T Series User Manual page 188

Setting up Extended Functions
7.
Enter adjusted value 2 (AJ.VAL2). After entering the value, press the
LEFT/RIGHT arrow keys (
UP/DOWN arrow keys (
User settings (USER)
8.
If a measured value is obtained correctly, " GOOD " will be displayed and then the display
will be automatically returned to the calibration selection screen.
7-64
/ ): Move the digit
/ ): Change the numerical value
Setting item
Adjusted value 2 (AJ.
VAL2)
Set value
-199.999 to 199.999 (mm)
Automatically
key.
Default value
10.000
WUME-HGT-3