Menu Display Settings - Panasonic HG-T Series User Manual

6.4.12 Menu Display Settings (

Functions can be extended by changing the menu display settings.
Changing the menu display for extended settings display enables you to change the settings of
the following functions.
Setting mode
Advanced settings (ADVANC)
Calculation settings (CALC)(for mas-
ter units only)
Copy settings (COPY)
Bank settings (BANK)
Calibration settings (CALIB)
Setting method
Hold down for 2 seconds
Setting item
Menu display settings (MENU)
<Reference>
Turning OFF the power returns "MENU" (menu display settings) to "NORMAL" (general function
display).
WUME-HGT-3
)
Hold settings (HOLD)
Simultaneous input (ALL IN)(for master units only)
External input (EXT.IN)
External output (EXT.OUT)
External output delay timer selection (OUT.DLY)
Number of digits displayed (DIGIT)
Analog scaling (ANALOG)
Eco mode (ECO)
Alarm settings (ALARM)
Key lock function selection (KEYLOC)
Interference prevention function (INTF.PR)(for master units only)
Sampling cycle (SAMPLI)
Calculation mode (MODE)
Calculation application selection (APPLI)
Copy individual selection (CPY.SEL)(for master units only)
Copy batch selection (CHK.ALL)(for master units only)
Copy execution (CPY.EXE)(for master units only)
Copy lock (LOCK)(for slave units only)
Bank save selection (BNK.DAT)
Calibration selection (CAL.SEL)
Set value
General function display (NORMAL)
Extended function display (ADV.)
Setting up General Functions
Setting item
: Select
: Finalize
Default value
NORMAL
6-29