Safety Precautions - Panasonic HG-T Series User Manual

Before Using This Product

1.1 Safety Precautions

This section explains important rules that must be observed to prevent human injury and prop-
erty damage.
■ The hazards that may occur if the product is used incorrectly are described and classified by
level of harm.
WARNING
CAUTION
● Never use this product as a sensing device for personnel protection.
● For sensing devices for personal protection, use products that conform to the laws and standards
related to personal protection in each country, such as OSHA, ANSI, and IEC.
● This product is designed to inspect (judge or measure) objects and so must not be used to ensure
safety, for example, to prevent accidents that affect human lives or property.
● Do not look at or touch direct laser beams or other reflections of light, as doing so is dangerous.
● For the controller DC power supply, only use a power supply that is isolated by means of an isola-
tion transformer or otherwise.
● There is a risk of short-circuiting and damage to the controller or power supply if a transformer such
as an autotransformer is used. There is a risk of short-circuiting and damage to the controller or
power supply if the controller is incorrectly mounted or connected.
● The HG-TC series controller is designed to be used with the HG-T series special-purpose sen-
sor head to satisfy the specifications. If the controller is used with any sensor head other than the
special-purpose sensor head, the specifications will not be satisfied and malfunctioning or another
problem may occur.
1-2
Always observe
Risk of death or serious injury.
Risk of minor injury or property damage.
WARNING
CAUTION
WUME-HGT-3