External Inputs - Panasonic HG-T Series User Manual

Setting up Extended Functions

7.2.3 External Inputs (

This function allows you to select a combination of signals to be input to external input 1, input 2,
and input 3 from five types.
■ Preset
You can perform zero-point adjustment and shift to any preset value.
For details, refer to "5.5.2 Preset".
■ Reset
When a reset signal is input, measured values, calculated values, and other values are reset.
For details on how to use hold, refer to "7.2.1 Hold Settings".
■ Trigger
If a trigger signal is input, the judgment value (JUDGE.V) is held while the signal is being in-
put.
For details, refer to "7.2.1 Hold Settings".
■ Bank A / B
The contents of each bank can be read by combining bank A input and bank B input.
For details on how to combine the inputs of each bank, refer to "5.5.3 Bank Mode".
■ Laser emission stop
While a laser emission stop signal is being input, laser radiation is stopped.
External input setting combinations are shown below.
External input
Preset/Reset/Trigger (P/R/T)
Bank A/Bank B/Preset (BANK/P)
Bank A/Bank B/Reset (BANK/R)
Bank A/Bank B/Trigger (BANK/T)
Preset/Trigger/Laser emission stop
(P/T/L)
Minimum input time
●
The minimum input time and standby time differ according to the input type.
<Preset input>
ON
Preset input
OFF
<Reset input>
ON
Reset input
OFF
<Trigger input>
ON
Trigger input
OFF
7-18
)
Input 1 (Pink)
Preset
20 ms minimum
20 ms minimum
2 ms minimum 2 ms minimum
Input signal combinations
Input 2 (Purple)
Preset
Bank A
Bank A
Bank A
Preset
20 ms minimum
20 ms minimum
Input 3 (Pink/Purple)
Reset
Bank B
Bank B
Bank B
Trigger Laser emission stop
Preset canceled
1.5 s minimum
Trigger
Preset
Reset
Trigger
WUME-HGT-3