Panasonic HG-T Series User Manual page 192

Specifications and Dimensions
I/O circuit diagrams
● HG-TC101 / NPN output type
* S1
Non-voltage contact or NPN open-collector transistor
0 to +1.2 VDC: Valid
+8V to +V DC or open: Invalid
(Note): Use shielded cables for analog output.
<Reference>
● All outputs are equipped with short-circuit protection. If any one of outputs 1 to 3 short-circuits,
all outputs temporarily turn OFF. The outputs automatically recover when the short-circuit state
is cleared.
8-4
(Brown) + V
(Black) Output 1
(White) Output 2
(Black / Gray) Output 3
(Pink) External input 1
(Purple) External input 2
(Pink / Purple) External input 3
(Blue) 0V
(Gray) Analog output
AGND (Shielded) Analog ground (Note)
or
Load
Load
*S1
*S1
+V
Load
+
24 VDC ±10%
–
*S1
0V
Analog
Input device
WUME-HGT-3