4.3.3 Connecting to the Controller
Insert the controller connector on the sensor head connection cable into the connector for the
sensor head connection cable on the controller.
Insert the connector firmly. Risk of sensor head or controller damage if not completely con-
nected.
4.3.4 Disconnecting from the Controller
Grasp the controller, and while pressing on the release lever on the controller connector of the
sensor head connection cable, pull the lever toward you to disconnect the cable.
Do not pull by holding the cable without pressing the release lever, as this can cause cable
break or connector break.
WUME-HGT-3
Insert
Release lever
Pull out
Installation and Connections
4-7