External Circuit - Panasonic Grid-EYE AMG88 Series Manual

External circuit

(1) In case of setting I2C slave address of the sensor 1101000
※ Connect terminal 5 (AD_SELECT) to GND.
To microcomputer etc.
To microcomputer etc.
To microcomputer etc.
(2) In case of setting I2C slave address of the sensor 1101001
※ Connect terminal 5 (AD_SELECT) to VDD.
To microcomputer etc.
To microcomputer etc.
To microcomputer etc.
・ This circuit is an example to drive Infrared Array Sensor "Grid-EYE", so that our company will not take any
responsibility of loss which is due to this circuit.
・ The wiring connected to VDD are same electrical potential (same supply voltage).
・ If there is a difference of electric potential between the terminals, it can be cause of breakdown.
・ Connect wiring to solid GND with wide and short pattern on PCB.
・ If wiring pattern is designed thin and long, temperature accuracy will be degraded.
Packing format (Tape and reel)
Tape dimensions (Typ.)
16.0
0.630
7.5
0.295
9.0
0.354
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
②SDA
③SCL
④INT
⑤AD SELECT
⑥GND
GND
②SDA
③SCL
④INT
⑤AD SELECT
⑥GND
GND
1.75
0.069 0.35
0.014
4.7
0.185
AMG88xx（High performance type）
⑬VPP
⑫DVDD-PC
⑩AVDD-PC
⑨VDD
10 μF±20%
⑬VPP
⑫DVDD-PC
⑩AVDD-PC
⑨VDD
10 μF±20%
Dimensions of tape reel (Typ.)
Top cover tape
Embossed carrier tape
ø13
ø0.512
VDD
VDD
21.5
0.846
17.5
0.689
Unit : mm inch
10-Feb-23