Kodak X-Omat 480 RA Service Manual page 70

TANK ASSEMBLY
SCREWS
PROCESSOR
FRAME
[15] Remove the LEVEL SENSING ASSEMBLY.
[16] Lift the TANK ASSEMBLY out of the PROCESSOR FRAME.
[17] Keep the 4 FRICTION PLATES for assembly of the new TANK ASSEMBLY.
[18] Install the new TANK ASSEMBLY.
[19] Install all parts removed in previous steps and connect the WATER HOSE.
5-22
LEVEL SENSING
ASSEMBLY
Figure 5-19 Removing the Tank Assembly — Top View
PROCESSOR
FRAME
TANK ASSEMBLY
SCREWS
FRICTION PLATE (4)
(Not Shown)
H108_0259DCA
H108_0259DC
246616