Kodak X-Omat 480 RA Service Manual page 67

[7] Remove:
• 4 RACK SUPPORT/DRYER DRIVE SCREWS
• RACK SUPPORT/DRYER DRIVE ASSEMBLY
• 4 NON-DRIVE RACK SUPPORT SCREWS
• RACK SUPPORT ASSEMBLY.
[8] Remove the 3 BRACKET SCREWS supporting the THERMOWELLS. See Figure 5-18.
[9] Move the THERMOWELLS to access and remove the 3 SCREWS securing the BRACKET to the bottom
of the DEVELOPER TANK.
RACK SUPPORT/
DRYER DRIVE
SCREWS
NON-DRIVE
RACK SUPPORT
SCREWS
246616
RACK SUPPORT/
DRYER DRIVE ASSEMBLY
Figure 5-17 Removing the Rack Supports — Top View
RACK SUPPORT
ASSEMBLY
RACK SUPPORT/
DRYER DRIVE
SCREWS
NON-DRIVE
RACK SUPPORT
SCREWS
H108_0149DCA
H108_0259DC
5-19