Table of Contents
Advertisement
• After draining the TANKS, small amounts of solution will remain in the plumbing system. Be
prepared to wipe up any spills.
• While doing steps 10, 11, and 12, place a mark on each TUBE as you remove the TUBE from the
TANK so that you can identify the TUBES for assembly.
[10]
Remove DRAIN TUBING from the WASH TANK.
[11]
Remove all TUBING connected to the sides and bottom of the FIXER TANK.
[12]
Remove all TUBING connected to the sides and bottom of the DEVELOPER TANK.
[13]
Remove all TUBING connected to the sides and bottom of the WASH TANK.
[14]
Remove the 4 HEX SOCKET SCREWS securing the TANK ASSEMBLY to the processor FRAME.
246616
NOTE
5-21
Advertisement
Table of Contents
