Kodak X-Omat 480 RA Service Manual page 44

[2] Disconnect the wires from the HEATER BAR.
[3] Remove the HEATER BAR ASSEMBLY.
[4] Install a new HEATER BAR ASSEMBLY.
[5] Connect the wires disconnected in step 2.
[6] Install the GRILL, ROLLERS, and AIR TUBES.
The first time the processor is energized, the HEATER will have an odor. This is normal for a new HEATER.
4-12
NOTE
Figure 4-11 Removing the Dryer Heater
GRILL
ROLLER (12)
AIR TUBE (6)
HEATER BAR
ASSEMBLY
H108_0300DCA
H108_0300DA
246616