Table of Contents
Advertisement
1.3 System Features
Budget Management
Description
Limits the telephone usage to a pre-assigned amount. For example, the limit may be the amount
deposited at check-in of a hotel. If the pre-assigned limit is reached, the extension user cannot
make further calls until he / she receives authorisation from the Manager or an Operator.
This is useful to keep phone bills down by restricting the excess amount of phone charge.
Conditions
• Hardware Requirements
To utilise this feature, one of the following trunk cards is required:
E1 Digital Trunk card, ELCOT card ( equipped with Pay Tone card ), BRI card or PRI30
card.
• In some countries, the E1 card must not be connected to the Public Switched Network.
• An emergency call can be made even if the phone charge of the extension reached the pre-
assigned amount.
Installation Manual References
• 2.5.2 E1 Digital Trunk Card (KX-T96188)
• 2.5.3 ELCOT Card (KX-TD50180)
• 2.5.4 BRI Card (KX-TD50288)
• 2.5.5 PRI30 Card (KX-TD50290)
• 2.7.5 Pay Tone Card (KX-TD50189)
Programming Guide References
• 2.4 Class of Service (COS)
– Charge Management
• 5.14 Charge
– Charge Display on LCD
– Charge by SMDR
– [Charge Verification ID Code] Tenant 1-8
– Rate
– Currency
– Currency Display Position
– Treatment of Charge Limit
– Meter Count up by Answer Detection
Features Guide References
1.3 System Features
• Charge Fee Reference
20
Features Guide
Advertisement
Table of Contents
