Table of Contents
Advertisement
609
Description
Selection
Default
Programming
Conditions
Feature References
4-124
System Programming
4.8
Extension Programming
Voice Mail Access Codes
Assigns a mailbox number for each extension, only if program
[990] "System Additional Information, Field (18)" is set to "free."
• Jack number: KX-TD816 – 01 through 16, (-1 / -2),
KX-TD1232 – 01 through 64, (-1 / -2),
(-1 = first part, -2 = second part)
• Mailbox number: 16 digits (max.)
All jacks – Not stored
1.
Enter 609.
Display: Mailbox ID Code
2.
Press NEXT.
Display: Jack NO?->
3.
Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display example: #01-1:Not Stored
4.
Enter a mailbox number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7.
Repeat steps 4 through 6.
8.
Press END.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available. Jack
numbers in the out-of-service system are unacceptable.
• For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
• The system supports a maximum of eight jacks (16 jacks during System
Connection) for connection to a Voice Processing System as the Voice
Mail or Automated Attendant ports.
• Each mailbox number has a maximum of 16 digits, consisting of 0
through 9,
, # and PAUSE.
• To display parts of the mailbox number which have scrolled off the
display, press
or
Section 3, Features,
Voice Mail Integration
.
Advertisement
Table of Contents
