Call Forwarding-All Calls And Do-Not-Disturb - Panasonic DBS 576 Technical Manual

Chapter 5. Key Telephone Features
To cancel Call Forwarding - No Answer:
1. Lift the handset or press the ON/OFF key.
2. Enter the appropriate Cancel Call Forwarding code:
• For your extension, enter 733.
• For another extension, enter 753.
3. If canceling Call Forwarding for another extension, dial the
extension number.
4. Replace the handset or press the ON/OFF key.

Call Forwarding-All Calls and Do-Not-Disturb

The System allows you to cancel both Call Forwarding-All Calls and Do-Not-Disturb (DND) for your
own extension in one step.
Operation
To cancel Call Forwarding-All Calls and DND:.
1. Lift the handset or press the ON/OFF key.
2. Enter the CF-All/DND Clear code (default = 7**).
3. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Related Programming
• FF1-0-03: Extension COS (Call Forward All/Busy/No-Answer/DND Cancel)
• FF1-0-03: Extension COS (Call Forward/All Calls)
• FF1-0-03: Extension COS (Call Forward/Busy)
• FF1-0-03: Extension COS (Call Forward/No Answer)
• FF1-0-03: Extension COS (Call Forward/Other)
• FF1-2: Dial Plan
• FF1-0-03: NPDN and PNPDN Call Forwarding Programming Address
Considerations
• Calls cannot be forwarded to an extension that already has Call Forwarding or DND activated.
(For example, extension 220 can only forward to extension 225 if 225 is not forwarded.
• If forwarding to an outside number, the destination number must be pre-programmed into a
System Speed Dial (SSD) code.
• Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.
5-18
Action
Action
DBS 576 (USA) issued April 2002
Section 700 - Operation
Result
Intercom dial tone
Result
Intercom dial tone
576-51-700