Co Line Name Assignment - Panasonic KX-TD816CE Installation Manual

4.6 CO Line Programming
Description
Selection
Default
Programming
Conditions
Feature References

CO Line Name Assignment

Used to name CO lines. The preset name is shown on a display
proprietary telephone when an incoming outside call is placed to
the telephone.
• CO line number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
• Name: 10 characters (max.)
All CO lines – Not stored
1. Enter 417.
Display: CO Line Name
2. Press NEXT.
Display: CO Line NO?→
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01:Not Stored
4. Enter a name.
For entering characters, see Section 4.1.3 "Entering Characters."
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5. Press STORE.
6. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
• In the case of KX-TD1232, CO01 through CO12 are for the Master
System and CO13 through CO24 are for the Slave, if available.
• There is a maximum of 24 names. Each name has a maximum of 10
characters.
• To assign all CO lines to one selection, press the
this case, the display shows the contents programmed for CO01.
Section 3, Features,
CO Incoming Call Information Display
Display, Call Information
417
( =all CO lines)
( =all CO lines)
key in step 3. In
33