First Digit Time - Panasonic KX-TD1232JT Programming Manual

[207] First Digit Time

Description
Sets the maximum time allowed between the start of an outside dial tone and the first digit
dialled on an outgoing outside call. If an extension user fails to dial any digits during this time,
the DTMF (Dual Tone Multi-Frequency) receiver is released.
Selection
Time (seconds): 5 through 120
Default
10 s
Programming
1.
Enter 207.
Display: 1st Digit Time
2.
Press NEXT.
Display example: Time: 10 sec
3.
Enter the time.
To change the current entry, press CLEAR and enter the new time.
4.
Press STORE.
5.
Press END.
Conditions
• This timer is used for toll restriction checking.
• You cannot leave the entry empty.
Features Guide References
Toll Restriction
General Programming
2.3 Timer Programming
103