Error Processing - Comtech EF Data XPA-200 Installation And Operation Manual

XPA200-7984-I-OPT1, X-Band SSPA
5.8.4 Stored Alarm
The 100 alarms are date/time stamped and stored in memory as
they occur. The alarm entry is also updated with its date/time
of clearance.
command.
5.8.4.1 Total Stored Alarms
This command retrieves the total number of stored alarms and
the time and date of the most recent alarm.
Retrieve Total Alarms:
Confirmation:
5.8.4.2 Clear All Stored Alarms
Clear Alarms:
Confirmation:
5.8.4.3 List All Alarms
List All Alarms: <DEV/LAA_'cr'
Confirmation:
Where:
5.9

ERROR PROCESSING

5.9.1 General Errors
The following Error Responses may be generated by any
command instead of a confirmation:
XPA200-7984-I-OPT1, Rev.2
The entry remains in memory until it is removed by
>DEV/LAA_'cr'
xxx yyyyyyyyyyy hh:mm:ss mm/dd/yy'cr'
xxx yyyyyyyyyyy hh:mm:ss mm/dd/yy'cr'
xxx yyyyyyyyyyy hh:mm:ss mm/dd/yy'cr'
"
"
xxx yyyyyyyyyyy hh:mm:ss mm/dd/yy'cr''lf']
xxx = stored fault number
yyyyyyyyyyy = fault description
hh:mm:ss = fault time
mm/dd/yy = fault date
<DEV/TSA_'cr'
>DEV/TSA_TOTAL:nnn'cr'
LAST:hh:mm:ss
<DEV/CAA_YES'cr'
>DEV/CAA_CLEARED'cr''lf']
" "
" "
Remote Control Remote Control
mm/dd/yy'cr''lf']
"
"
5-17