Comtech EF Data XPA-200 Installation And Operation Manual page 64

XPA200-7984-I-OPT1, X-Band SSPA
Set Fault Recovery: <DEV/AFR_xxx'cr'
Confirmation:
Retrieve Status:
Confirmation:
5.8.3 Status Commands
Status commands retrieve configuration, maintenance and
alarm status in summary form.
5.8.3.1 Configuration Status
Configuration Status:
Confirmation:
5.8.3.2 Maintenance Status
Maintenance Status:
Confirmation:
XPA200-7984-I-OPT1, Rev.2
>DEV/AFR_xxx'cr''lf']
<DEV/AFR_'cr'
>DEV/AFR_xxx'cr''lf']
<DEV/RCS_'cr'
>DEV/RCS_'cr'
ATT_yy.yy'cr'
AMP_nnn'cr'
TX_nnn'cr'
ONL_nnn'cr'
AFR_nnn'cr'
<DEV/RMS_'cr'
>DEV/RMS_'cr'
V+28_xx.x'cr'
V+12_xx.x'cr'
V-12_xx.x'cr'
V +5_x.x'cr'
V -5_x.x'cr'
V+10_1_xx.x'cr'
V+10_2_xx.x'cr'
TEMP_xx'cr'
FPWR_xx.x'cr'
RPWR_xx.x'cr''lf']
Remote Control Remote Control
xxx = ON or 0FF
Attenuator
Amplifier - ON/OFF
Transmit - ON/OFF
Online - ON/OFF
Auto Flt Recovery-ON/OFF
+28 VDC Supply
+12 VDC Supply
-12 VDC Supply
+5 VDC Supply
-5 VDC Supply
10 VDC Supply #1
10 VDC Supply #2
Temperature
RF Forward Power (dBm)
RF Reflected Power (dBm)
5-12