Comtech EF Data XPA-200 Installation And Operation Manual page 26

XPA200-7984-I-OPT1, X-Band SSPA
1.11.3 Combiner Interface, Connector J5
The Redundant Loop interface connector, J5, is a 19 pin
circular connector, type MS3112E14-19S.
specifications is contained in Table 1-3
a MS3116F14-19P.
J5, Combiner Interface Connector Pin-Out
Pin #
A Inhibit Command
B VPC A+B->Antenna
C not used
D not used
E VPC Output Common
F VPC A(B)->Antenna
G not used
H Inhibit Common
J not used
K not used
XPA200-7984-I-OPT1, REV.3
Table 1-3.
Description
The pin-out
The mating connector is
Pin # Description
L not used
M not used
N not used
P not used
R not used
S Local SumFlt Common
T Local SumFlt NO
U not used
V not used
Introduction
1-10