Configuring Hardware With The Dmd, With Simatic Tia Portal As An Example - Burkert 8650 Operating Instructions Manual

Type 8650 REV.2
Initial start-up and project planning
17.3 Configuring hardware with the DMD, with SIMATIC
TIA Portal as an example
A software such as SIMATIC TIA Portal from Siemens is required to configure the bus master.
Use the following program versions to ensure the hardware's compatibility:
• SIMATIC Step 7 version 5.3 or higher
or
• SIMATIC TIA Portal version 11 or higher.
configuration:
→ Before accessing the AirLINE Ex system, the corresponding DMD (file package) must be imported in the
program's hardware catalogue.
→ Select the desired interface module in the hardware catalogue of the TIA Portal and drag it into the work
area via drag-and-drop.
The active AirLINE Ex modules are in the same branch of the hardware catalogue. They are treated like a
digital, electrical output module.
Fig. 55: Select ET 200iSP from the branch "Additional field devices"
English
85