Hmi Display Raster Layout And Text Font Selection; Text Handling - ABB RELION 615 Series Engineering Manual

1MAC108982-MB E
6.1.1.4
6.1.1.5
615 series ANSI
Engineering Manual
Description
Resistor
Grounding transformer
Petersen coil
Power factor controller

HMI display raster layout and text font selection

The raster on the page changes from symbol presentation to text presentation when a text
object is selected and vice versa.
The text can be presented in UniCode characters (6 x 12 pixels). The total size of the
presented white area (page) represents the visible part of the LHMI display without the
header line.
The visible display for a single-line diagram is organized in a raster of 9 x 7 (columns x
rows). Each symbol (presented in 15 x 15 pixels) included in the drag-and-drop method
must be dropped into a raster box.
The description text for an apparatus object can be placed in all four directions around the
symbol. The description is part of the apparatus object. It is possible to place the symbols
without the assistance of Snap to Grid and manually change the position coordinates.

Text handling

The display switches when text is selected in a display of 22 x 9 (columns x rows). One
display box holds one character. A text element must be placed in the position of the
display.
The name and the unit of a measurement or text symbol can be changed by
double-clicking the symbol or via the Object Properties view.
Selecting and toggling Show Texts using the IED fonts can be used to preview the single-
line diagram to see how it is presented in the real HMI display.
LHMI engineering
IEC representation
Section 6
ANSI representation
109