Load Profile Tool User Interface - ABB RELION 615 Series Engineering Manual

1MAC108982-MB E
5.4.2
615 series ANSI
Engineering Manual

Load Profile tool user interface

GUID-4B275369-045F-4407-89A2-44071839699D V1 EN
Figure 61: Load Profile tool interface
Table 5: Available actions on the user interface
Action Description
Local Path Default local path (C:\PCMDataBases\LPR) is the location from which the records are
shown on the Load Profile tool. It is also the default path for saving records.
Local Path field also allows the user to change the target location where the records are
saved. The grid of the Load Profile tool shows only the records in the default local path
including unsaved records in the temp path (C:\Temp\Load\Profile Tool) if there
are any. Therefore changing the default local path allows the user to save records at the
specified location on the local machine but the user is not be able to see those records
in the grid of the Load Profile tool.
Load Clicking the Load button downloads all available records from C:\LDP\COMTRADE
directory in the protection relay to a temporary folder C:\Temp\LoadProfileTool on
the local machine. In this temporary folder, the target file name is constant, and loading
again overwrites the file. An unsaved record is deleted when the tool is closed.
Save Clicking the Save button moves the records to the default or specified local path, Load
transfers the records to a temporary folder. Each load profile record comprises two files
with file extensions .dat and .cfg.
Clicking Save adds a time stamp to the file names and moves the two files pertaining to
the record to the default or specified folder. Saving another record creates a new record
in addition to the old ones.
Clear Clicking the Clear button clears record from either the Load Profile tool or protection relay
or both. Before deleting the records, a confirmation dialog box is shown.
Table continues on next page
Protection and control engineering
Section 5
95