Starting Ied Compare; Ied Compare Tool Interface - ABB RELION 615 Series Engineering Manual

Section 5
Protection and control engineering
5.6.1
5.6.2
100
Detailed instructions are shown in PCM600 documentation.

Starting IED Compare

• Start IED Compare in the context menu in plant structure.
1. In the PCM600 plant structure, right-click Substation, Voltage level, Bay or
IED.
2. Select IED Compare.
• Start IED Compare from the PCM600 main menu.
1. Select Substation, Voltage level, Bay or IED in the PCM600 plant structure.
2. On the PCM600 menu bar, point to Tools and select IED Compare.

IED Compare tool interface

The comparison report shows differences in the configuration of two IEDs. Hardware,
application, display, GOOSE and parameter configuration differences are grouped and
listed under the corresponding headings.
1MAC108982-MB E
615 series ANSI
Engineering Manual