1MAC108982-MB E
5.5.1
615 series ANSI
Engineering Manual
Opening and closing Fault Record tool
•
To open the Fault Record tool, right-click an IED node in the PCM600 project tree
and select Fault Record Tool.
GUID-06441245-E6DA-4C9F-9363-26CE8D521CB2 V1 EN
Figure 63:
Opening the Fault Record tool
•
To close the Fault Record tool, click the Close button in the tool.
The Fault Record tool runs in the same process as PCM600 but in a separate window.
Multiple instances of the tool can be run at the same time. Any open tool instances are
closed without confirmation when PCM600 is closed.
Protection and control engineering
Section 5
97