Inserting An Ied From The Template Directory - ABB RELION 615 Series Engineering Manual

Section 4
Setting up a project
4.3.3
60
• Select Empty configuration to create an empty configuration.
• Select Example configuration to import any existing example configuration.
Click Browse to select the .pcmi/.pcmt file that has the example configuration.
• Select Standard configuration to generate a default configuration.
5. On the Version Selection page, select the IEC 61850 version and click Next to
generate the functions.
6. The Setup Complete Page shows the summary of the IED type, version, IP address
and the selected order number. Click Finish to confirm the configuration and
conduct the insertion.

Inserting an IED from the template directory

IED templates can be used for replicating IEDs with same order code in PCM600 projects.
Template includes IED application configuration, graphical display configuration
(single-line diagram), communication protocol mappings and parameters. An IED in the
plant structure can be exported as a template (.pcmt file). The template library can be built
from all the exported IED templates.
It is also possible to insert an IED from the template library to create a new IED in the plant
structure. After a template IED has been imported, the IP address, the Caption in IED's
Object Properties and the Technical Key that corresponds to the physical IED have to be
changed.
A template IED can be inserted only when the bay is selected in the plant
structure.
1. In the Plant structure view, select the bay, right-click, point to New and select
Create from template.
The Create New Object from Template dialog box opens.
1MAC108982-MB E
615 series ANSI
Engineering Manual