ABB RELION 615 Series Engineering Manual page 30

Section 2
Relay engineering process
22
Setting up a PCM600 project
• The plant structure is built according to the substation structure.
The maximum size of a project is 180 IEDs. However, in order to
maintain good performance and usability of the tool, it is
recommended to divide one big project into multiple smaller
PCM600 projects.
• To add a protection relay to a project, a suitable Connectivity package is needed.
Protection relays can be added either while connected or disconnected or through
other means such as an IED template.
• IED objects are uniquely named within the PCM600 project.
Application configuration in the Application Configuration tool
• Protection and control functions can be configured as needed.
• The configuration made in the Application Configuration tool is saved to make the
interfaces and signals available for other engineering tools within PCM600, for
example, for the Parameter Setting tool.
Parameter setting and configuration in the Parameter Setting tool
• Configuration parameters such as CT and VT conversion values of the transformer
module are checked by the tool.
• If needed, the setting values are checked and adjusted with the Parameter Setting tool.
Single-line diagram configuration in Graphical Display Editor
• It is possible to create a single-line diagram for the switching devices in the bay.
• Measurements can be included when needed.
• The dynamic elements are linked to the functions created in the Application
Configuration tool; for example, a breaker object is linked to the circuit breaker
control function.
LHMI engineering
• The LEDs are configured with Application Configuration.
• The LED behavior is defined with Parameter Setting.
• The HMI Event Filtering tool can be used to configure event visibility on the LHMI
event list.
Communication protocol engineering
1MAC108982-MB E
615 series ANSI
Engineering Manual