Table of Contents
Advertisement
46
MONTHLY INSPECTION AND MAINTENANCE CHECKLIST
Inspection and maintenance procedures in accordance with this checklist are to be conducted
at least once a month for helmets used frequently and once every two months for helmets used
less than ten times (i.e. ten dives) in any given month.
This checklist is to be used in conjunction with the helmet Operations and Maintenance Manual for
guidance in conducting each step in the inspection and maintenance of the G3000SS diving helmet.
NOTE:
•
The procedures in this checklist are to be performed only by personnel who
have received factory authorized training through an Aqua Lung Service
and Repair Seminar.
•
If you do not completely understand all of the procedures outlined in this checklist,
contact Aqua Lung to speak with a technical advisor before proceeding any further.
•
If the helmet is used in contaminated water, monthly inspection and maintenance
is required.
•
After completing this checklist, it should be kept in the helmet maintenance log/file.
WARNING: Aqua Lung strongly recommends completion of this checklist and
meeting the minimum requirements provided before using the G3000SS diving
helmet. However, these requirements are not conclusive, as further steps may
be required depending on the type of activity performed. FAILURE TO COMPLY
WITH THIS CHECKLIST MAY RESULT IN SERIOUS INJURY OR EVEN DEATH.
COMPLETE THE FOLLOWING BOXES PRIOR TO THE CHECKLIST
COMPLETE THE SIGNATURE, DATE AND COMMENTS AT THE END OF THE CHECKLIST
Helmet Serial No:
Diver/Tender:
(Print Name)
Aqua Lung G3000SS Diving Helmet Operations & Maintenance Manual
CHECKLIST 5
G3000SS DIVING HELMET
Date:
Advertisement
Table of Contents
