Table of Contents
Advertisement
72
This procedure is to be performed only by personnel who have received appropriate training.
If you do not completely understand all of the procedure, contact Aqua Lung to speak directly
with a Technical Advisor before proceeding any further.
Step 1: Remove two retainer port
screws (11) from top corner of helmet
using a Phillips #3 screwdriver.
Step 3: Replace the two retainer
port screws (11) and tighten using
a Phillips #3 screwdriver to 45 in.lbs
(5 Nm).
Aqua Lung G3000SS Diving Helmet Operations & Maintenance Manual
APPENDIX K
CAMERA/LIGHT BRACKET (P/N 400107)
INSTALLATION INSTRUCTIONS
Step-by-Step Assembly Instructions
Step 4: Right hand bracket installed.
Step 6: Left and Right brackets.
NOTE: Brackets may
be bent to shape as
required.
Step 2: Line up bracket holes
with helmet retainer holes.
Step 5: Left hand bracket installed.
Advertisement
Table of Contents
