ACTION
CHECK DIVER'S ENTIRE
RIG
(must be completed by supervisor)
WARNING: Both latch
catches must fit into
place correctly or the
helmet may flood.
FINAL BREATHING
CHECK
(must be completed by diver)
Signature:
Comments:
PRE-DIVE CHECKLIST (continued)
•
Check adjustment and fit of the entire rig, specific
points:
•
Head liner secured inside the helmet shell.
•
Neck dam is installed.
•
Neck retainer secured with both locking catches
(L and R) engaged on neck retainer.
•
Chin strap properly fastened.
•
Check adjustment and fit of the diver's safety
harness. Umbilical strain release, EGS hose
quick disconnect, boots, gloves, etc.
•
Ensure helmet supply pressure is at minimum
129 psig (8.9 bar) as per the regulated supply
pressure table in Checklist 3, In-Water Checklist
for Supervisor.
•
Check to ensure the helmet is breathing correctly
with no complications.
NOTE: Ensure all equipment is properly
adjusted and is properly functioning.
PROCEDURE
Date:
17
INITIALS