Head Liner - Aqua Lung G3000SS Operation & Maintenance Manual

Diving helmet

Hide thumbs Also See for G3000SS:

Table of Contents

CAUTION: The head liner and oral-nasal mask must be used at all times when diving.

The head liner ensures that the oral-nasal mask maintains a good fit on the diver's

face and reduces dead space in the helmet, this helps to prevent CO2 build-up.

Step 1: Cut hook and loop tape

into 4 pieces, 2 in x 1 in each.

Step 4: Stick hook and loop tabs on

both rear sides of the helmet shell (1).

Step 7: Place left speaker (38) in

left pocket of head liner.

NOTE: The head liner may be washed by hand or machine. Recommended Hook and Loop

Tape: Industrial strength, sticky back tape, waterproof.

NOTE: The head liner should be fitted carefully into the helmet shell so that visible parts of

the helmet shell (i.e. bare spots) are minimized.

Aqua Lung G3000SS Diving Helmet Operations & Maintenance Manual

HEAD LINER

Step 2: Round off corners on 2

pieces of hook and loop tape.

Step 5: Head liner.

Step 8: Place right speaker (28)

in right pocket of head liner.

Step 3: Stick hook and loop tabs on

front sides of the helmet shell (1).

Step 6: Line up head liner as shown.

Step 9: Head liner installed into

helmet shell (1). (No oral-nasal

mask fitted).

Table of Contents