Table of Contents
Advertisement
34
Step 1: Place o-ring (14) in the
port groove.
Step 4: Face port (13) installed.
Step 7: Install top screw (11) in
port retainer (12), all holes should
be lined up.
Aqua Lung G3000SS Diving Helmet Operations & Maintenance Manual
FACE PORT ASSEMBLY
Step 2: O-ring (14) installed in
port groove.
Step 5: Place port retainer (12)
over face port (13) and line up
holes.
Step 8: Install the remaining
screws (11).
Step 3: Place face port (13) into
the helmet shell (1).
Step 6: Install bottom screw (11)
in the port retainer (12) with a
Phillips #3 screwdriver.
Step 9: Tighten all screws (11) to
45 in.lbs (5 Nm) with a Phillips #3
screwdriver.
Advertisement
Table of Contents
