Aqua Lung G3000SS Operation & Maintenance Manual page 42

Diving helmet

Hide thumbs Also See for G3000SS:

Table of Contents

Step 23: Place all spacer rings (17)

onto the dual exhaust seat (16).

Step 26: Insert retainer port

screws (11) and tighten by hand.

Step 29: Tighten nut (20c) until snug

using a 3/8" flat blade screwdriver.

Aqua Lung G3000SS Diving Helmet Operations & Maintenance Manual

Step 24: Spacer rings (17) in place.

HELMET FINAL ASSEMBLY (continued)

Step 27: Tighten screws (11)

using a Phillips #3 screwdriver

to 45 in.lbs (5 Nm).

Step 30: Double water dump

exhaust installed.

Step 25: Place exhaust valve cover

(19) on top of spacer rings (17).

Step 28: Place handwheel knob

(20a), spring (20b) and nut (20c)

onto the free flow / water dump

valve stem (57).

Step 31: Place the manifold

gasket (42) over the back side

of helmet shell (1) and line up

the holes.

Table of Contents