Technician Checklists; General Guidelines - Aqua Lung G3000SS Operation & Maintenance Manual

Diving helmet
Hide thumbs Also See for G3000SS:
Table of Contents

Advertisement

24
The following technician checklists are provided to assist all technicians:
• Monthly Inspection & Maintenance Checklist ........................................................Section VII
• Annual Inspection & Maintenance Checklist .........................................................Section VII
1. In order to correctly perform the procedures outlined in this manual, it is important to follow each
step exactly in the order given. Read over the entire manual to become familiar with all procedures
before attempting to service or repair the G3000SS diving helmet.
2. Keep the manual open beside you for reference while performing each procedure. Do not rely on
memory.
3. All service and repair should be carried out in a work area specifically set up and equipped for
the task. Adequate lighting, cleanliness, and easy access to all required tools are essential for an
efficient repair facility.
4. As each unit is disassembled, reusable components should be segregated and not allowed to
intermix with non-reusable parts. Delicate parts, including inlet fittings and crowns which contain
critical sealing surfaces, must be protected and isolated form other parts to prevent damage during
the cleaning procedure.
5. Use only genuine Aqua Lung parts provided in the service kits. DO NOT attempt to substitute any
part with another manufacturer's, regardless of any similarity in shape or size. Substitution with
other manufacturer's parts constitutes an after-market modification of the product and renders all
warranties null and void.
6. Do not attempt to reuse mandatory replacement parts under any circumstance, regardless of the
amount of use the product has received since it was manufactured or last serviced.
7. When reassembling, it is important to follow every torque specification prescribed in this manual,
using a calibrated Newton Meter (Nm) or Inch Pound (in lb) torque wrench. Some parts are made
of either brass or composite materials and can be permanently damaged by undue stress.
Aqua Lung G3000SS Diving Helmet Operations & Maintenance Manual
TECHNICIAN CHECKLIST

GENERAL GUIDELINES

Advertisement

Table of Contents
loading

Table of Contents