Internal Usb Key - Dell PowerEdge M630 Owner's Manual

Internal USB key

The blade provides an internal USB connector for a USB flash memory key.The USB memory keycan beused as aboot device,
security key, or mass storage device. Touse the internal USB connector, the Internal USB Port option must be enabled in the
Integrated Devices screen of the System Setup.
Toboot from the USB memory key, you must configure the USB memory key with a boot image, and then specify the USB memory
key in the boot sequence in the System Setup. For information on creating a bootable file on the USB memory key, see the user
documentation that accompanied the USB memory key.
Replacing the internal USB key
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructionsthatcamewiththeproduct.
CAUTION: Toavoidinterferencewithothercomponentsintheblade, themaximumpermissibledimensionsofthe USB
key are 15.9 mm wide x 57.15 mm long x 7.9 mm high.
1. Follow the safety guidelines listed in safety instructions section.
2. Followthe procedure listed in the Beforeworking inside yoursystem section.
Steps
1.
Locate the USB connector/USB key.
2.
If installed, remove the USB key.
3.
Insert the new USB memory key into the USB connector.
Figure 23. Replacing the USB memory key
1. USB memorykey
70
2. USB memory key connector