Removing a 1.8-inch SSD from a 1.8-inch SSD carrier
Prerequisite
CAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructionsthatcamewiththeproduct.
Follow the safety guidelines listed in safety instructions section.
Step
Pull the rails on the side of the carrier and lift the SSD out of the carrier.
Figure 50. Removing a 1.8-inch SSD in a 1.8-inch SSD carrier
1.
SSD carrier
Next step
Install a 1.8-inch SSD in a 1.8-inch SSD carrier.
Related links
Safety instructions
Installing a 1.8-inch SSD in a 1.8-inch SSD carrier
Installing a 1.8-inch SSD in a 1.8-inch SSD carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructionsthatcamewiththeproduct.
NOTE: Youmustremovethe SSDfrom a SSDcarriertoreplaceafaulty SSDfrom a SSDcarrier.
1.
Follow the safety guidelines listed in safety instructions section.
2.
Remove a 1.8-inch SSD from a 1.8-inch SSD carrier.
Step
Insert the SSD into the SSD carrier with the connector end of the SSD toward the back. When aligned correctly, the back of
the SSD is flush with the back of the SSD carrier.
2.
SSD
95