Dell PowerEdge M630 Owner's Manual page 107

3. Followthe procedure listed inthe After working inside your system section.
Import your new or existing iDRAC Enterprise license. For more information, see the iDRAC8 User's Guide at Dell.com/
4.
idracmanuals.
5. Ensure that you:
a. Use the Easy Restore feature torestorethe Service Tag.For more information, see the Restoring the Service Tagbyusing
Easy Restore section.
b. If the Service Tagis not backed up in the backup flash device, enter the system Service Tagmanually. For more
information, see the Restoring the Service Tag by using Easy Restore section.
c. Update the BIOS and iDRAC versions.
d. Reenable the TrustedPlatform Module (TPM). For more information, seethe Reenabling the TPM for BitLocker users
section or the Reenabling the TPM for Intel TXT users section.
Related links
Safety instructions
Removing the system board
Installing the Trusted Platform Module
Trusted Platform Module
After working inside your system
the Service Tagbyusing the EasyRestore feature Entering
the system Service Tag by using System Setup
Initializing the TPM for BitLocker users
Initializing the TPM for TXT users
Replacing the internal USB key
Installing the optional IDSDM card
Installing the optional rSPI card
Installing the Network Daughter Card
Installing the mezzanine card
Installing the PCIe extender or storage controller card
Installing the hard drive or SSD cage
Installing the hard drive or SSD backplane
Installing a hard drive or SSD
Installing the cooling shroud
Installing memory modules
Installing a processor
Restoring the Service Tag by using the Easy Restore feature
The Easy Restore feature enables you to restore your system's Service Tag, license, UEFI configuration, and the system configuration
data after replacing the system board. All data is automatically backed up in a backup flash device. If BIOS detects a new system
board and the Service Tagin the backup flash device, BIOS prompts the user torestore the backup information.
1.
Turn on the system.
If BIOS detects anewsystem board, andif the Service Tagis present in the backup flash device, BIOS displays the Service Tag,
the status of the license, andthe UEFIDiagnosticsversion.
2.
Perform one of the following steps:
Press Y to restore the Service Tag, license, and diagnostics information.
•
Press N to navigate to the Dell Lifecycle Controller based restoreoptions.
•
Press F10 to restore data from a previously created Hardware Server Profile.
•
After the restore process is complete, BIOS prompts to restore the system configuration data.
3.
Perform one of the following steps:
Press Y to restorethe system configuration data.
•
Press N to use the default configuration settings.
•
Restoring
107