Dell PowerEdge M630 Owner's Manual page 34

4. On the System BIOS screen, click System Information.
Related links
System Information
System Information details
The System Information screen details are explained as follows:
Option Description
System Model Specifies the system model name.
Name
System BIOS
Specifies the BIOS version installed on the system.
Version
System
Specifies the current version of the Management Engine firmware.
Management
Engine Version
System Service Tag Specifies the system Service Tag.
System
Specifies the name of the system manufacturer.
Manufacturer
System
Specifies the contact information of the system manufacturer.
Manufacturer
Contact
Information
System CPLD
Specifies the current version of the system complex programmable logic device (CPLD) firmware.
Version
UEFI Compliance
Specifies the UEFI compliance level of the system firmware.
Version
Related links
System Information
System Information details
Viewing System Information
Memory Settings
Youcan use the Memory Settings screen to view all the memory settings and enable or disable specific memory functions, such as
system memory testing and node interleaving.
Related links
Memory Settings details
System BIOS
Viewing Memory Settings
Viewing Memory Settings
To view the Memory Settings screen, perform the following steps:
1.
Turn on, or restart your system.
2.
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Memory Settings.
34