Removing The Mezzanine Card - Dell PowerEdge M630 Owner's Manual

Removing the mezzanine card

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructionsthatcamewiththeproduct.
1. Follow the safety guidelines listed in safety instructions section.
2. Followthe procedure listed in the Beforeworking inside yoursystem section.
Steps
1.
Open the retention latch by pressing the ridged area on the retention latch, and lifting the latch up.
CAUTION: Toprevent damage to the mezzanine card, you must hold the card only by its edges.
2.
Lift the mezzanine card up and awayfrom the system.
3.
Close the retention latch.
Figure 19. Removing the mezzanine card
1. mezzanine card (2)
3. ridge area on the retention latch
Next steps
1. Install the mezzanine card.
2. Followthe procedure listed inthe After working inside your system section.
Related links
Safety instructions
Installing the mezzanine card
Before working inside your system
After working inside your system
66
2. connector (2)