Shutdown Procedure For Servicing A Hard Drive Or Ssd - Dell PowerEdge M630 Owner's Manual

Step
Insert the hard drive or SSD blank into the hard drive or SSD slot until the release latch clicks into place.
Figure 46. Installing a 2.5-inch hard drive blank
1. hard drive or SSD blank
Figure 47. Installing a 1.8-inch SSD blank
1. SSD blank
Related links
Safety instructions
Removing a hard drive or SSD

Shutdown procedure for servicing a hard drive or SSD

NOTE: This section applies only to situations where the blade must be turned off to service a hard drive or SSD. In many
situations, the hard drive or SSD can be serviced while the blade is turned on.
92
2. release latch
2. release latch