Installing The System Cover - Dell PowerEdge M630 Owner's Manual

Figure 9. Removing the system cover
1. alignment guides on the system cover and the chassis
3. release button
Related links
Safety instructions

Installing the system cover

Installing the system cover
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. Youshould only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructionsthatcamewiththeproduct.
1. Follow the safety guidelines listed in safety instructions section.
2. Ensure that no tools or parts are left inside the blade.
Steps
1.
Align the alignment guide on the system cover with the alignment guide on the chassis.
2.
Lower the cover onto the chassis.
3.
Slide the cover until it clicks into position.
A properly seated cover is flush with the surface of the chassis.
52
2. system cover
4. I/O connectorcover