Idrac Settings Utility; Device Settings - Dell PowerEdge M630 Owner's Manual

Option Description
and system reset is needed for ISC results to be applied. The Enabled- No Reboot option executes ISC and
continues without applying ISC results until the next time system reset occurs. The Enabledoption executes
ISC and forces an immediate system reset so that ISC results can be applied. It takes the system longer to
be ready due to the forced system reset. When disabled, ISC doesnotexecute.
Related links
Miscellaneous Settings
Viewing Miscellaneous Settings

iDRAC Settings utility

The iDRAC settings utility is an interface to set up and configure the iDRAC parameters byusing UEFI. Youcan enable or disable
various iDRAC parameters by using the iDRAC settings utility.
NOTE: Accessing some of the features on the iDRAC settings utility needs the iDRAC Enterprise License upgrade.
For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals.
Related links

Device Settings

System BIOS
Entering the iDRAC Settings utility
Changing the thermal settings
Entering the iDRAC Settings utility
1.
Turn on or restart the managed system.
2.
Press F2 during Power-on Self-test (POST).
3. On the SystemSetupMain Menupage, click iDRACSettings.
The iDRAC Settings screen is displayed.
Related links
iDRAC Settings utility
Changing the thermal settings
The iDRAC settings utility enables you to select and customize the thermal control settings for your system.
Click iDRAC Settings → Thermal.
1.
Under SYSTEM THERMAL PROFILE → Thermal Profile, select one of the following options:
2.
• Default Thermal Profile Settings
• Maximum Performance (Performance Optimized)
• Minimum Power (Performance per WattOptimized)
Under USERCOOLINGOPTIONS, setthe Fan Speed Offset, Minimum Fan Speed, and Custom Minimum Fan Speed.
3.
Click Back → Finish → Yes.
4.
Related links
iDRAC Settings utility
Device Settings
Device Settings enables you to configure device parameters.
Related links
System BIOS
4