Physical Configuration
Hardware activation files are a digitally signed Java Archive (.jar) typically delivered
through Oracle's Software Delivery Cloud. These activation files can be added and
removed from the library using the SLConsole. To download a purchased hardware
activation file:
Go to Oracle's Software Delivery Cloud at:
1.
Choose a language, and enter your information.
2.
Read and agree to terms and conditions.
3.
Under select a product pack, choose Oracle StorageTek Products. Under platform
4.
select Generic Platform.
Select the StorageTek SL3000 Modular Library System.
5.
Download the purchased features. Refer to the SL3000 User's Guide for installation
6.
instructions.
Physical Configuration
Before selecting a physical configuration, read the options and requirements for each
module carefully and review
Base Module (required)
A Base module is required with every initial order. A standalone Base module is the
smallest library configuration.
Table 9–1
Description
Base module, no active slots, one drive array (eight drive slots), CAP
Base module for non-European Union countries, no active slots, one drive array
(eight drive slots), CAP
Options:
8 (standard), 16, or 24 drive slots. To order additional drive arrays, see
■
Arrays"
Perforated window (standard), window storage array, or operator panel. To order,
■
see
Requirements:
A minimum of 200 activated slots must be purchased, see
■
page 9-6.
Drive Expansion Module (DEM)
Order a DEM for additional drive capacity.
Table 9–2
Description
DEM, 200 active slots, one drive array (eight drive slots)
Options:
9-2 StorageTek SL3000 Systems Assurance Guide
Chapter 2, "Library Modules and
Base Module Part Number
on page 9-4.
"Module Add-on Options"
Drive Expansion Module Part Numbers
https://edelivery.oracle.com/
on page 9-4.
ATO
SL3000K-DEM200-Z
Hardware".
ATO
SL3000-BASE-Z
7105811
"Tape Drive
"Activating Capacity"
on
PTO
XSL3000-DEM200-F