Power Options; Dc Power Supplies; Ac Power Distribution Units (Pdu); Ac Power Cords - Oracle StorageTek SL3000 System Assurance Manual

Power Options

Refer to
well as how to calculate power requirements for the SL3000 library.

DC Power Supplies

The number of powers supplies required depends on the power redundancy option
selected (N+1, 2N, or 2N+1) and the number of tape drives. To calculate the number of
DC power supplies to order for the tape drives, see
Supply Quantities"
If the 2N+1 power options is selected, order one additional 1200W DC supply to
power the robotics, and two additional 200W cPCI power supplies for the electronics
control module. These are in addition to the DC supplies required for the tape drives.
For more information, see
Table 9–19
Description
1200W DC power supply (for tape drives and robotics)
200W cPCI power supply (for ECM)

AC Power Distribution Units (PDU)

One PDU is required per Base module or DEM. The same PDU type must be installed
in both module. There can be a maximum of four PDUs in the library depending on
the configuration selected. To determine the number and type of PDUs to order, see
Chapter 5, "Power and
Table 9–20
Description
100 - 127 VAC 20 Amp PDU
200 - 240 VAC 30 Amp PDU

AC Power Cords

You must order one power cord per PDU installed:
N+1: One power cord for the Base module and an additional power cord for the
■
DEM (if installed)
2N or 2N+1: Two power cords for the Base module and two additional power
■
cords for the DEM (if installed)
Table 9–21
Description
US Power Cord 20A/110V, 3.7 meter
US Power Cord 30A/220V, 3.7 meters
International Power Cord, 30A/220V, 4 meters

Software Options

Hardware activation files for these software options are required. For download
instructions, see
about these options, refer to the SL3000 User's Guide or SL3000 Host Connectivity Guide.
Chapter 5, "Power and Cooling"
on page 5-4.
"DC Power Supplies"

DC Power Supply Part Numbers

Cooling".

AC Power Distribution Unit Part Numbers

AC Power Cord Part Numbers

"Hardware Activation Files"
for details on the power configurations, as
"Calculating Tape Drive Power
on page 5-2.
ATO
SL3000-1DCPWR-Z
SL3000-EMDCPWR-Z XSL3000-EM-DCPWR-N
ATO
SL3000-PDU110-Z
SL3000-PDU240-Z
ATO
SL3000-PWCD20110
SL3000-PWCD30220
SL3000-IPWCD30220
on page 9-1. For additional information
Software Options
PTO
XSL3000-DCPWR-Z-N
PTO
XSL3000-PDU-110-N
XSL3000-PDU-240-N
PTO
XSL3000-PC20110-N
XSL3000-PC30220-N
XSL3000-IPC30220-N
Ordering 9-9