Cartridge Expansion Module (Cem); Dual Robotics Support; Parking Expansion Module (Pem); Cartridge Expansion Module Part Numbers - Oracle StorageTek SL3000 System Assurance Manual

8 (standard), 16, 24, or 32 drive slots. To order additional drive arrays, see
■
Drive Arrays"
Perforated window (standard), window storage array, operator panel, or CAP. To
■
order, see
Requirements:
One DEM maximum per library.
■
Activation file for 200 slots included. However, additional activation permits may
■
be purchased to activate storage capacity in this module, see
on page 9-6.

Cartridge Expansion Module (CEM)

Order up to eight cartridge expansion modules for additional tape cartridge storage
capacity.
Table 9–3
Description
CEM, no active slots (438 to 620 cartridge slots)
Options:
One CAP per module. To order, see
■
Two CEMs may be converted to PEMs at any time, if the dual robotics option is
■
selected. There is a loss of capacity when converting a CEM to a PEM. Ensure that
the library has the required capacity.
Requirements:
Maximum of eight CEMs per library.
■
Activation permits may be purchased to activate storage capacity in this module,
■
see

Dual Robotics Support

Dual robotics require either two PEMs or two AEMs and a minimum 2N power with
240 VAC.

Parking Expansion Module (PEM)

A PEM provides dual robotics support. A PEM is a converted CEM.
Table 9–4
Description
PEM, no active slots (230 to 312 cartridge slots)
Options:
PEM on left side may have a CAP, but a CAP on the right PEM is not supported.
■
To order, see
Requirements:
If AEMs are not installed, two PEMs (one on each end of the library) are required
■
to support dual robotics.
on page 9-4.
"Module Add-on Options"

Cartridge Expansion Module Part Numbers

"Activating Capacity" on page 9-6.

Parking Expansion Module Part Numbers

"Cartridge Access Port"
on page 9-4.
ATO
SL3000-1CEM-Z
"Cartridge Access Port" on page 9-5.
ATO
SL3000-1CEM-Z
on page 9-5.
Physical Configuration
"Tape
"Activating Capacity"
PTO
XSL3000-CEM-Z-N
PTO
XSL3000-CEM-Z-N
Ordering 9-3