SawStop TSA-FOT Owner's Manual page 64

5. Always wear safety glasses when using the saw. Also use a face or dust mask if
the cutting operation is dusty. Everyday eyeglasses are not safety glasses.
6. Keep hands out of the line of the saw blade. Never reach around or over the
saw blade. Keep proper footing and balance at all times.
7. Maintain the Folding Outfeed Table as specified in this manual. Use only
identical replacement parts when servicing the Folding Outfeed Table.
8. Turn the power disconnect switch to OFF before servicing the saw and/
or Folding Outfeed Table. Always ensure the power is OFF before changing
components or accessories such as blades, brake cartridges, and the like.
9. Check to make sure the saw and Folding Outfeed Table are in proper working
order before using them. For example, check the alignment of moving parts,
look to see whether moving parts are binding or rubbing, check to see whether
parts are broken, make sure accessories are properly mounted in the saw, and
check any other conditions that may affect the operation of the saw or Folding
Outfeed Table. Any parts that are damaged should be properly repaired or
replaced.
10. Never use the Folding Outfeed Table if your saw is raised off the floor (i.e. if the
wheels on a mobile base are supporting the saw).
59
TSA-FOT OWNER'S MANUAL